Einleitung
Werkzeuge
-
-
Place the laptop face down with the battery facing away from you.
-
Locate the two buttons next to the battery.
-
Slide the right slider to the unlocked (red) position.
-
-
-
Hold the left button to the left.
-
Slide the battery with your other hand away from you and it should disconnect.
-
-
-
Remove the five Phillips # 0 screws from the back panel.
-
Using your finger or a plastic spudger start to carefully pry up the back planel.
-
-
-
Remove the four Phillips #0 screws holding the hard drive case to the laptop.
-
Lift the hard drive upwards by the two arms in order to remove the hard drive case from the laptop.
-
-
-
Next, slide the case off of the broken hard drive.
-
Slide the working hard drive into the case and screw it on.
-
To reassemble your device, follow these instructions in reverse order.