Asus Eee PC 1000HE Keyboard Replacement

Geschrieben von: Mike Glenn
  • Kommentare: 0
Asus Eee PC 1000HE Keyboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

4

Zeitaufwand

5 Minuten

Einleitung

Follow this guide to replace the keyboard of your netbook. Removing the keyboard is also necessary to access many of the interior components of your device.

  1. IG2HCKRsnAgNqp2H

    • Lay the laptop down with the bottom facing upwards.

    • Locate the two battery lock slide tabs.

  2. HkhTBiDPOsRHxP1I
    HkhTBiDPOsRHxP1I
    TVZhEsvmFiwsqEvW

    • Slide the tabs outward to unlock the battery.

    • The right tab will remain in the unlocked position while the left tab must be held.

    • While holding the left tab outward, slide the battery away from you to remove it.

  3. Kqwu1aCGNlOlNCHW
    Kqwu1aCGNlOlNCHW
    RPZXYOpSOATKygIU
    KhqIviWvMxGVyLaq

    • The keyboard will still be attached to the body of the netbook at the conclusion of this step through a ribbon cable located at the bottom edge of the keyboard. Improper removal may result in damage to your device.

    • Identify the four connection points holding the top of the keyboard to the main body of the netbook. To remove the keyboard, use the spudger to unhook the keyboard upwards at these points.

    • The keyboard will become more disconnected as you use the spudger at each connection point.

  4. IDlWYAFE63pRFrPe
    IDlWYAFE63pRFrPe
    dPcNNVYbwpUl3T3p
    JilqdK6E1wbpBobP

    • Flip the keyboard over by pulling the top edge of the keyboard away from the netbook body, using the bottom edge as a hinge point.

    • Locate the opaque strip, or ribbon cable, connecting the back of the keyboard to the hardware of the netbook.

    • To disconnect the ribbon cable, use a plastic opening tool to pull each side of the black plastic strip, located below the ribbon cable, away from the ribbon cable.

    • The black strip will disconnect completely from the ribbon cable. The keyboard will then be detached from the netbook's body and can be safely removed.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Mike Glenn

Mitglied seit: 21/03/16

960 Reputation

0 Kommentare