Einleitung

Use these easy to follow instructions to replace your RAM.

  1. bwrV1gruitAIFOj4
    • Before you begin, make sure your device is powered off and not connected to the power supply.

    • Turn the tablet over and position it so it matches the picture.

  2. SQhTdArrLMxNpfa6
    • Locate the sliding tab on the right and slide it to the left in order to unlock the battery.

  3. LR6pXgwMeHPnSDj5
    • Use a plastic opening tool to lift the battery up as you slide the tab on the left to the right.

  4. VGQCOS5FYarGmASd
    • Lift the battery out of the device.

  5. KySMOAWMtIusCtRa
    • Locate the compartment where the RAM is stored.

  6. YrcxqtOx1ASjHDZI
    YrcxqtOx1ASjHDZI
    ylTFCgiVQLsEmWEh
    • Grab a drive adapter and a PH0 phillips head bit and use the screwdriver to remove the 5mm screw from the cover of the compartment.

  7. OZ3FkexQflLVMMHv
    OZ3FkexQflLVMMHv
    kxIh2OvQHnrjFGyW
    • Use a plastic opening tool to remove the cover.

  8. P4oOqj62HIYnEqn6
    P4oOqj62HIYnEqn6
    ZE1jJPnq1xZYuMok
    PEnR4CypPkkO2NXy
    • In order to release the RAM module, you will need to move the metal tabs on both sides at the same time. This can be accomplished by using plastic opening tools or your fingers.

  9. px6PtXhMQLAIVDaL
    px6PtXhMQLAIVDaL
    w1GldeGZGuh5oOsV
    • Once you move the tabs, the RAM module will pop up and you can remove it with your fingers so you can put in a replacement.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Jarnell Miranda

Mitglied seit: 17/10/15

657 Reputation

0 Kommentare