Einleitung

The speaker is where sound comes out. When videos or music are played too loudly, it can cause the speaker to blow. This is a component of the Memo Pad that needs to be replaced when this problem occurs.

  1. XohBGwK1BSAHOKVB
    XohBGwK1BSAHOKVB
    KqjNOrlMwvDXChSF
    ZoJl4gLJWWvExj2U
    • Before beginning to disassemble the device, power it off.

    • Make sure to be gentle with the device. Excessive force can result in a damaged screen.

    • Using the Jimmy tool, gently wedge it into the seam of the device at the side.

    • Pry the Jimmy tool gently all around the seam. Use up and down motions until the back panel is detached.

  2. QywkuLbcxSHhUFx6
    QywkuLbcxSHhUFx6
    fxw3NY5pBqAjqCSU
    sgtgEfDZPAEBy3MQ
    • From the top of the tablet, locate the white cable connector.

    • It is inserted in a black port on the motherboard.

    • Use the blue plastic opening tool to push the white cable connector out of the port.

    • Push the cable in a sideways motion towards the top of the device.

  3. AJCjJeJKQwEoYRa6
    AJCjJeJKQwEoYRa6
    FPZsMwmqBfirAsUl
    • Use the Phillips #000 screwdriver to remove the seven screws.

    • There should be two silver and five black screws for a total of seven screws.

  4. ZF5RmkjGWSPeVZiK
    ZF5RmkjGWSPeVZiK
    uiZsVQnenvGIeNIb
    • Use the slender, metal spudger tool to gently lift up the edge of the speaker to remove the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tatiana Schneider

Mitglied seit: 04/10/15

596 Reputation

0 Kommentare