Asus MeMo Pad 10 ME102A Battery Replacement

Geschrieben von: Noah Peseckis
  • Kommentare: 0
Asus MeMo Pad 10 ME102A Battery Replacement

Schwierigkeitsgrad

Difficult

Schritte

6

Zeitaufwand

30 Minuten

Einleitung

This guide will show how to replace the battery for the Asus MeMo Pad 10 ME102A

  1. qoYIGS66Lg2GqmOH

    • Insert the blue plastic opening tool into the seam between the back panel and the chassis.

    • When removing the back panel, remember to keep the device face down on a flat surface in order to prevent dropping the device or anything inside of the device.

  2. EPXdIExRHK1BVYTK

    • Slide the plastic opener around the tablet. There will be spots of resistance. These should gently pop open as the tool slides through the seam.

  3. kjHJqHkSGsAjMOyw

    • After all of the clips have been opened, the back panel should be free to remove by hand

  4. AsYgMYnJD26Q5GAi
    AsYgMYnJD26Q5GAi
    BQVAyULVt6N1J1r3

    • Unplug the blue ribbon cable which runs across the top of the battery near the left-hand speaker. It connects by plugging into a white and black plug on each side. To unplug the ribbon cable, gently pull up the black tabs with the small plastic opening tool.

  5. HyTAu5PjaxDUYy3n
    HyTAu5PjaxDUYy3n
    QW5XHYUUxckFWEGx

    • Unplug the battery cable located on the opposite side of the battery. Use the plastic opening tool to gently push it out of the socket on the motherboard.

  6. ftWT31bffjnIyxhK
    ftWT31bffjnIyxhK
    HjXI2xmTAZo4Ftgn
    mP61TqQE2wi3RWIa

    • Separate the battery from the chassis by sliding the nylon spudger under the battery along the 3 glue strips. The glue needs to be gradually separated. The battery will lift free once the glue has been separated.

    • There are 3 glue strips holding the battery to the chassis: One under the blue ribbon cable, one under the center of the battery, and one under the battery by the plug.

    • While slight deformation is normal, do not overly bend the battery.

    • The glue needs to be gradually separated. Slow, persistent work with the spudger will be effective but can take an extended period of time.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Noah Peseckis

Mitglied seit: 15/09/16

150 Reputation

0 Kommentare