Asus Q325U Motherboard Replacement

Geschrieben von: Miriam Miller
  • Kommentare: 3
Asus Q325U Motherboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

24

Zeitaufwand

45 Minuten

Einleitung

This guide will show you the steps to replace the motherboard in an ASUS Q325U.

  1. alPVSZF1WCYht1ex
    alPVSZF1WCYht1ex
    2ONPVdrxnbOFSSPC
    lDsLQQ5gxgsJNRFx

    • Remove the ten 5mm screws using a T5 Torx screwdriver.

  2. fHDwkFbEkq4IsRXg
    fHDwkFbEkq4IsRXg
    KmYIrIM3ZB4pMDE1
    ZmZ6beK6dOOGWlk3

    • Lift the back panel upward using the suction tool.

  3. 3E1QOuJwJo3hrtCh
    3E1QOuJwJo3hrtCh
    sjnPWTxWikCuMyGU

    • Remove one 2mm screw on top of the SSD using a Phillips #1 screwdriver.

  4. cFWyrWlpgpqD2GZ5
    cFWyrWlpgpqD2GZ5
    krqFcoELYpYwUk5f

    • Carefully slide and lift the SSD to remove it.

  5. AgWvE4Z5DdgOLPOS
    AgWvE4Z5DdgOLPOS
    OjqK6nfMTOlRe3nk

    • Remove the seven 5mm screws around the battery using a Phillips #00 screwdriver.

  6. 5PwQbhTmmmKsO5FH
    5PwQbhTmmmKsO5FH
    UiqgqT6raY1FxdR3

    • Using a Phillips #000 screwdriver, remove the two 3mm screws on top of the orange battery connector.

    In my case, there were no screws, but two posts to be placed in corresponding slots in the replacement battery. So no need for the Philips #000.

    Emmanuel Francois -

  7. DIMhghyQ4Ftic6cm
    DIMhghyQ4Ftic6cm
    YMrNRAvhdMMxJV4t

    • Lift the battery out from the laptop.

    This was great! Thanks for publishing. One thing. The battery connection was not held by two 000 screws. The plastic connector simply clicked in place, so I carefully lifted it with a tool

    Joe Creighton -

  8. BLGHyRkL51ODTDyr
    BLGHyRkL51ODTDyr
    1NTym5n5mKdBfCG6

    • Remove the six 3mm screws using a Phillips #00.

  9. pNJdWwafLHwXDjbL
    pNJdWwafLHwXDjbL
    ZQf3LYgniwKNfYFk

    • Use the plastic opening tool to lift up the edge. Pull upward on the edge.

  10. EYPVbSLqpWLUlMRg
    EYPVbSLqpWLUlMRg
    oHMndBnpKpxAclE3

    • On the other side of the plate, remove the tape.

  11. i1hWokcSxKvWtGE6
    i1hWokcSxKvWtGE6
    qRNDyKKmaD5e2GfG

    • Remove the three 3.7 mm screws using a Phillips #00 screwdriver.

  12. MZTjccibmGZJ2GCX

    • Detach the black wire and plug shown using a tweezer.

  13. QOwl4FrvPuOCiwhN

    • Grab CPU fan by its edge and gently pull upwards to remove.

  14. amamTEu22JH4PVH6
    amamTEu22JH4PVH6
    q4LHSpQNiIHyATqd

    • Remove the first connection wire by pulling the small back loop with the Halberd Spudger.

  15. ya2irqjO1Er6NE4k
    ya2irqjO1Er6NE4k
    EDYppeluMqZyFLSt
    A1JoeFaswrSgoROK

    • Lift the small black tab of the orange connector with your fingers or a plastic opening tool.

    • Remove the orange connector by pulling with tweezers.

  16. umEbZtUpqxo3slk5
    umEbZtUpqxo3slk5
    FMJnnoLu2cHSuEMM
    WPdKDJTyiCqGf3R6

    • Lift the small black tab on the white plastic piece of the touch pad connector with a spudger.

    • Remove the touch pad connector by pulling with tweezers.

  17. MBukK1SBDPbO5uSp
    MBukK1SBDPbO5uSp
    ACHWHOndrLXKemvJ
    4qUwIuwASvZmRSJq

    • Lift the black tab on the long white plastic piece of the thick blue band.

    • Remove the thick blue band by pulling.

  18. Jm4bKVTLWluFg5IG
    Jm4bKVTLWluFg5IG
    qdKkxWecqM4LG36t
    DnGJPxQkC2aeyDw6

    • Remove the two Phillips #000 screws on the metal connector above the thick orange band.

    • Lift up the thick orange band.

  19. B6pYrFXFRnuJxV6Z
    B6pYrFXFRnuJxV6Z
    pQrABGp4iNj5QxUF
    DirJ2hVfQTIRBQA4

    • Gently lift up the two smallest connectors using your fingers or a plastic opening tool.

  20. WEfdJybVExWOwvlY
    WEfdJybVExWOwvlY
    ZXjSXMRJfManBWoF

    • Lift up the black hinge of the connector using a plastic opening tool.

    • Remove the connector using a tweezer.

  21. OAovruevSdPy1SIY
    OAovruevSdPy1SIY
    AXXDPfChQOOaUlo1
    J1Zro1LFVZKAElKa

    • Pull up the tap of the biggest connector using your fingers.

    • Lift the gold hinge using a plastic opening tool.

    • Lift the connector up with your fingers to remove.

  22. XLD54ySns1Ud4ofY
    XLD54ySns1Ud4ofY
    Iuu2MdLbciJ6RqmZ

    • Remove the four 4.8 mm screws using a Phillips #00 screwdriver.

  23. t3l1GChJdngXS4U4
    t3l1GChJdngXS4U4
    Ir5Cw26DOOBSQlgI

    • Slightly open up the laptop. This will lift up the hinge at the corner and free the motherboard.

  24. vpKH1gVnTrhwjgFA
    vpKH1gVnTrhwjgFA
    lW1vMYM3cV4MZllV

    • Pull the motherboard away from the corner to remove.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Miriam Miller

Mitglied seit: 24/01/19

639 Reputation

Ein Kommentar

Can you help me identify which of those is the webcam conector? I hava a faulty webcam and my guess is that it is a physical conection problem.

pgmolin -