Einleitung

Use this guide to remove or replace the optical drive in an Asus ROG G751JL.

  1. ZRZEdXCpM5OiyJ3Y
    ZRZEdXCpM5OiyJ3Y
    DdoxkFQZInUUTOMG
    • Use an opening tool to pry up the small rubber cover on the upper right corner of the RAM access door.

  2. tOYnCxUOyYZsQbOL
    • Remove the 5.3 mm Phillips #00 screw securing the RAM access door.

    • This screw is held in the hole in the door with a washer and will not come out of the hole, even after you unscrew it.

  3. JLgaT2jFW1VmKOgu
    JLgaT2jFW1VmKOgu
    XEtuiwI1qOlapaTM
    • Insert the point of an opening pick in the seam near the top right corner of the RAM access door and gently pry the door up slightly.

    • The door is held in place by small clips around its edges. Pry until you feel the nearest clips release.

  4. TEE5PrYbGXmxJW1k
    TEE5PrYbGXmxJW1k
    G6undfclxW3QPvWO
    1B2egEmUAtLhPFmB
    • Insert the wide edge of an opening pick into a new part of the seam between the door and the computer.

    • Pry the door up to release the clips closest to the pick.

    • Continue to slide the pick along the seam all the way around the door, prying as you go, until all the clips holding the door down have been released.

  5. 6mJbRDrkfoWOMRDP
    • Remove the RAM access door.

  6. MWDBkIDma5U6BXUL
    • Remove the 5.2 mm Phillips #00 screw securing the optical drive.

  7. i1jwOKJcfJWVnsYW
    i1jwOKJcfJWVnsYW
    R3IT2XWsLpYEp5p6
    ZgtVXKnb3uFENt5W
    • Insert an opening tool into the gap between the optical drive and the laptop.

    • Pry the optical drive straight out of the laptop.

    • Remove the optical drive.

Abschluss

To reassemble your device, follow the above steps in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Check out our Answers community for troubleshooting help.

Kyle Miller

Mitglied seit: 06/10/16

677 Reputation

0 Kommentare