Asus ROG Strix GL702VM-BHI7N09 Battery Replacement

Geschrieben von: Gunnar Hudson
  • Kommentare: 6
Asus ROG Strix GL702VM-BHI7N09 Battery Replacement

Schwierigkeitsgrad

Easy

Schritte

4

Zeitaufwand

15 Minuten

Einleitung

Should your Asus ROG Strix GL702VM-BHI7N09 Gaming Laptop suffer from short battery life or outright battery failure this guide may be used to replace it.

The battery enables the laptop to be used without its charger cord. Battery failure prevents the laptop from functioning without its charger. Replacing the battery will restore this capability.

No advanced skills are needed for this procedure.

  1. 3DSrW6xOSBsyhKUp
    3DSrW6xOSBsyhKUp
    HMePUTBaGYRYtKup

    • Flip the laptop over to the back panel, with the serial numbers facing up.

    • Using a Phillips #1 screwdriver, remove the ten 12 mm screws from the back panel.

  2. MOnGZEst66UtJHEX
    MOnGZEst66UtJHEX
    YuxOeUiyEjBDZPRR
    qOXCQUsNPjIHXnex

    • The snap seals don't need a lot of pressure to open, and may break if forced. Be gentle with the opening tool.

    • Wedge the sharp edge of the plastic opening tool into the seam between the back panel and the rest of the laptop, then gently pry the panel up.

    • There will be a snapping sound as you remove the back panel, but that is just the seal loosening.

    • Continue breaking the seals by sliding the plastic opening tool around the entire laptop under the seam until the back panel is free.

    • Once you have broken all the seals, carefully lift the panel off.

    To make sure you don’t damage your board it’s necessary to unplug the main battery

    Lazaro Guajardo -

  3. WTa4WC1TYkIs4VhK

    • Unplug the battery from the motherboard.

    It’s not always a simple matter of pulling. Some connectors have clips that engage and you can break the connector pulling it without pressing on the release points… It would be helpful if you had a video showing the various types of connectors you might run into and demonstrated the proper way to disconnect them.

    Jeff Schwager -

    Agreed just broke mine

    Edward -

    You also want to make sure you don't pull up on the connector. You want to pull straight back. I lifted up on mine and broke the connector. My battery no longer charges.

    It's poorly designed and more than likely on purpose.

    Max Beef -

    VERY IMPORTANT:

    The battery connection on the motherboard has a small metal sheath that slides back, which will allow you to remove the connector without breaking anything. The metal piece slides back and forth to secure the battery connector, so to remove and insert the new battery, the metal sliding piece has to be slid back, then you can gently remove the connector without breaking the plastic part attached to the motherboard. Mine didn't move that much, maybe a millimeter or so, just enough to give clearance to remove the connector from the interlocked plastic parts.

    Mac B -

  4. EhRxILuLW2PTgRor
    EhRxILuLW2PTgRor
    p5tiOdGmEdNZllFM
    IguAceuPvhFo6WGM

    • Unscrew the 3.8 mm Phillips #1 screw on the top right hand corner of the battery.

    • Lift battery from laptop frame.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Gunnar Hudson

Mitglied seit: 04/11/19

248 Reputation

Ein Kommentar

Cheers mate! Worked like a %#*@. Built lots of PCs in my time but this is the first time I’ve taken a laptop apart. I should mention: there are 4 screws holding the battery in rather than the 1 you mention in this guide.

Collin MacQuarrie -