Einleitung
In the case that your Laptop’s Touchpad stops working, you may need to replace it. This guide shows you how to replace the Touchpad in just a few simple steps.
-
-
In order to remove the back lid, you must lay the laptop down with the lid closed and remove the screws with a Phillips #0 screwdriver.
-
There are five 80mm screws.
-
There are four 50mm screws.
-
Pull the back lid off of the laptop using your fingers.
-
-
-
Use the Phillips #0 screwdriver to remove the six screws attached to the silver panel.
-
Disconnect the LED ribbon wires using a spudger to lift the clamp.
-
-
-
Using the Phillips #0 screwdriver, remove the four screws on the silver panel.
-
Using a spudger, gently lift the silver ground strips off of the touch pad.
-
Pull the touch pad up and towards the battery to remove it from the laptop.
-
To reassemble your device, follow these instructions in reverse order.
