Einleitung

The hard drive is where almost every file in the computer exists. This component can fail if the computer is dropped or if a virus or the operating system corrupts the files located on the drive. Be aware that dropping the drive or placing it near a strong magnet may result in the permanent loss of files.

  1. LKdkrHB5TKeGVgfJ
    LKdkrHB5TKeGVgfJ
    P2oxK4mS2XhiJ5MF
    • Flip the device such that the labels are on top.

    • Use a Phillips #1 screwdriver to remove the four 8mm screws near the back.

    • Use the same screwdriver to remove the four 5mm screws in the front.

    • Use the same screwdriver to remove the single 9mm screw in the center.

    • Make sure that the device is powered down and unplugged.

  2. Lnsq6IVhuTVMTSK1
    Lnsq6IVhuTVMTSK1
    k6qoSjjR2WXIeeam
    • Remove the back cover by gently prying with a spudger.

  3. 3inPJ1SGTkaWDMkg
    3inPJ1SGTkaWDMkg
    kopYG66ha6P6XC6r
    • Remove the eight 5mm screws using a Phillips #1 screwdriver.

    • Do not puncture the battery.

  4. W6UoixvJyDs5gjEn
    • Disconnect the battery ribbon cable from the motherboard.

  5. d4SVFC6OBs6rZwZL
    • Remove the battery from the laptop.

  6. QqjSNdKJnThkUMly
    QqjSNdKJnThkUMly
    nPKZ1wG5GIumX1NQ
    • Unscrew the three 4mm screws holding the hard drive to the board.

  7. GXTgyR4uhb1XoIXA
    GXTgyR4uhb1XoIXA
    paYPePW2MfYPSVjC
    • Pull on the tab on the left side of the hard drive and slowly disconnect it from the board.

Abschluss

To reassemble your device, follow these instructions in reverse order.

John Thomas

Mitglied seit: 14/01/19

756 Reputation

0 Kommentare