Einleitung

The battery is the main source of power to the computer. Often times batteries will lose charge and need to be replaced. If the laptop won't turn on without the power cable, use this guide to replace the battery.

  1. gipF5r13NWWFD24b
    gipF5r13NWWFD24b
    kZbaMGL1RUQ6L3Lq
    • Before doing a replacement, make sure the laptop is fully shut off.

    • Using the JIS #0 Screwdriver, unscrew the ten 10 mm screws that hold the back casing in place.

  2. wlmM2RMQCf5oOAnL
    wlmM2RMQCf5oOAnL
    uNYCOmbQVvFnkWid
    • Pry open the back casing using the opening tool along the side crevice.

    • Try to use the opening tool at multiple points. Lifting the back casing abruptly could damage the laptop.

  3. KunS6uTR3yCDwwDM
    KunS6uTR3yCDwwDM
    Ac15IqZnvBdf1vUZ
    • Using the JIS #0 Screwdriver, remove the five 5.0 mm screws that hold down the battery.

  4. VXDBtosjyoYCtHP6
    VXDBtosjyoYCtHP6
    w1LXQHflcGivcWGK
    • Disconnect the cable connected to the motherboard.

    • To remove, lift the ends using the opening tool.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Aymane Elbernoussi

Mitglied seit: 14/02/18

160 Reputation

0 Kommentare