Einleitung

  1. Gek536a33gkvmCZf
    • Remove the following six screws:

    • Six 4 mm screws using a Phillips #0 screwdriver.

    • Remove the following one screw:

    • One 14 mm screw using a Phillips #0 screwdriver.

    • The 14mm screw goes in the center.

    There are also two other screws under the rubber feet above the battery.

    digg1024 -

    I agree. Two another 14 mm screws under the rubber feet.

    shao.onii -

  2. jmau2wwOGEb1qGxD
    • Use a plastic or metal spudger to separate the keyboard from the back panel and lift the keyboard out of place.

    How exactly does the keyboard pod out ? It doesn’t come off at the screen hinge.

    Clément Marshall -

  3. YHGsuCSxRPAIgMG6
    • Take two rubber caps off the back side of the laptop.

  4. opyREEcIfuTks4GP
    • Remove the following two screws under the rubber caps.

    • Two 14 mm screws using the Phillips #0 screw driver.

  5. BgKVRbkj1UItgC2R
    • Flip up the following:

    • The two latches holding the two cables shown(white and black)

    • Pull the cables free from the latches

    • Lift the keyboard from the computer

  6. A2FQa24QkQLsEbNB
    • Remove the following screws from the inside of the laptop:

    • Two 4 mm screws using the Phillips #0 phillips screwdriver.

    • One 5 mm screw using the Phillips #0 Phillips screwdriver located in the center a little below the battery.

  7. HOKtPodSBeSMgpDJ
    • Slide the battery up and out.

  8. WsmyGSmNTqmTF61h
    • Remove the Two 4 mm screws using Phillips #0 phillips screwdriver.

  9. qCtGmEpUvKNqECjI
    qCtGmEpUvKNqECjI
    w15ak4HSlVW2B2Bj
    • Unplug the set of wires located at bottom corner on fan.

  10. cFXNx22gCxDkRk1m
    cFXNx22gCxDkRk1m
    QHgygVCuKJstwQKd
    • Lift up and out to completely the remove fan component.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Vanessa Garcia

Mitglied seit: 22/01/15

1763 Reputation

0 Kommentare