Einleitung
We will show you how to open the laptop and change / upgrade the HDD (hard disk drive).
Werkzeuge
Ersatzteile
-
-
Switch off the Laptop and remove the Battery.
-
Unscrew the two Philips screws and remove the HDD / RAM Cover.
-
-
-
Remove three screws securing the hard drive caddy (hard drive assembly).
-
Slide the hard drive assembly to the left to disconnect it from the motherboard.
-
-
-
Remove the two Philips screws and separate the HDD from the caddy case.
-
You can install 2.5" SATA HDD, 5400rpm / 7200rpm, 320GB / 500GB / 750GB /1TB.
-
.
-
Did you do it successfully.
-
To reassemble your device, follow these instructions in reverse order.
Ein Kommentar
Were do you get the OS already installed on the drive. I have a Asus 550 with a 500 G and win 8.1. Looking to up grade to win 10 YES i have the GEO FORCE graphic card. Will I loose the use of the GEO FORCE. card. It has a i7 chip. And 6 g of line one cache would like to take to like 16 G… I would like to use the solid state hard drive. I understand it weathers bounces. Small slams and bangs better than the disc type. But I may not beable to afford this high a upgrade. Recommendations chrisdeiotte7@gmail.com