Asus ZenBook Flip UX360C Motherboard Replacement

Geschrieben von: Jonathan Heintz
  • Kommentare: 2
Asus ZenBook Flip UX360C Motherboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

25 Minuten

Einleitung

This guide will assist the user in replacing the motherboard of the Asus ZenBook Flip UX360C.

Caution: This guide shows use of a metal spudger to manipulate components inside of the device. Using a metal spudger on components within the outer case can cause damage to the device or harm to the user, especially if the battery is involved! Choose an ESD safe tool for these steps instead.

  1. TdRwxUL2qmAgarod

    • Remove all ten 5 mm Phillips #1 screws on the back cover.

    For me, these screws were the "T5" star bit.

    Eric Halstvedt -

  2. R1DiOYDjpHYMrOgO
    R1DiOYDjpHYMrOgO
    WLOhnOr2X1FljVMt
    ERWnXXC1DQbGB3OK

    • Use a metal spudger to gently separate the keyboard from the computer case.

    • Do not completely remove the keyboard as there are two ribbon cables that connect the keyboard to the motherboard.

    • Lift the keyboard slightly, and use a plastic spudger to release the two ZIF connections to free each ribbon cable.

    • Remove the keyboard.

  3. boovoQ34D5MXbD3u

    • Use the Phillips #1 screwdriver to remove all 5 mm screws.

  4. rM4pu2jWmScgDYCD

    • Use a plastic opening tool or nylon spudger to lift the monitor connections off of the main board.

  5. iQAtQBGOKSs11lyC
    iQAtQBGOKSs11lyC
    qiDHoSgfxr6yREVG

    • Clip off the battery from the main board.

    • Use of a metal spudger can cause damage to the device or harm to the user, especially near the battery! Use an ESD safe tool for this step instead.

  6. VtZLCGkXwCoKhuar
    VtZLCGkXwCoKhuar
    F3dS6YWTdDMAGO6c

    • Remove the black foam above the screw on the I/O board.

    • Remove the 5 mm #1 Phillips head screw.

    • Use of a metal spudger can cause damage to the device or harm to the user, especially near the battery! Use an ESD safe tool for this step instead.

  7. buX3UaldOfPZjj3c
    buX3UaldOfPZjj3c
    wQ6p3x2uCI2YsJCR

    • Pull the I/O board away from the chip to detach it.

    • Remove the I/O board and main board.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jonathan Heintz

Mitglied seit: 27/02/19

145 Reputation

Ein Kommentar

where can i buy the motherboard?

Thevan -