Asus ZenBook UX303U Back Panel Replacement

Geschrieben von: Luis Perez
  • Kommentare: 5
Asus ZenBook UX303U Back Panel Replacement

Schwierigkeitsgrad

Very easy

Schritte

3

Zeitaufwand

1 - 2 Minuten

Einleitung

This guide will show you how to replace a dented or damaged bottom panel on an Asus ZenBook UX303U laptop.

  1. RnAAXb2Q6HjJ6g55

    • Remove the two round rubber feet at the hinge-edge of the laptop.

    The process took me about 30 minutes. If I were to have to do it again then I could probably do it in 10 minutes now that I know what is involved!

    Jon Kerridge -

  2. XsL3OIeWIuDc4LOB

    • Remove the eleven 4 mm Phillips #00 screws from the back panel.

    These screws on other models are Torx T5 or T6, not Phillips

    Dylan Warburg -

    T4 screws on all but the two under the rear rubber feet; those are Phillips PH0 (and my model had two square rubber feet).

    Gregg Stanley -

  3. ueRA4jDHCiQAuPYT
    ueRA4jDHCiQAuPYT
    EkyRch2jtebMhwgg

    • Using a plastic opening tool pry the back panel off of the laptop.

    I lift more than the last photo shows. Dark rubber with plots, visible on photo are blocking the opening.

    djibe -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Luis Perez

Mitglied seit: 14/02/18

577 Reputation

Ein Kommentar

Some models may utilize Phillips #00 screws, but mine (and many others based on what I’ve now read) utilize Torx T5 screws around the edges of the panel.

Nick Brennan -