Einleitung

If the HD web camera is not functioning this guide will teach you how to get behind the screen cover to replace the camera.

Note: Be sure the camera is broken and not just a software issue before you replace it.

  1. ZYuCuMTEcMqSnUCG
    • Heat the adhesive behind the screen frame with a hair dryer or a heat gun.

    • Use low heat with the heat gun. Over heating could damage delicate electronic components.

  2. GbVCeREPO1mKHDEp
    GbVCeREPO1mKHDEp
    IMKZDicrcDFGpLpU
    g26XZ5DNui3mFefU
    • Insert a spudger between the display screen frame and the back screen panel.

    • Pry the display screen frame away from the back screen panel.

    • Continue to heat and remove the display screen frame along the whole perimeter.

  3. GDMCXKFqidGYqKNV
    GDMCXKFqidGYqKNV
    jAtEdpJLuSuEntQn
    SFxhMHMZXhRycTBx
    • Remove display screen frame completely before adhesive cools and hardens.

  4. ydkPdvNwZBFl1YtO
    ydkPdvNwZBFl1YtO
    F3nKsFLLdA4bhtIg
    • Unplug the bundled cable connector.

    • Pull the cable away from the connector in the same direction as the individual wires are running.

    • Pull evenly on the full width of the cable so that no individual wires are overly strained.

  5. dPpHlGWxJKBhZFWG
    dPpHlGWxJKBhZFWG
    ZILpkcMJlS4qSPdN
    HWK2wu1PxahsVjOP
    • Pry the camera out from the two pins on the left and right of the camera with the tip of a spudger.

    • Remove the camera completely.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Michael Remmel

Mitglied seit: 17/09/15

700 Reputation

2 Kommentare

what type/model/code for its replacement camera ? so i cant find it in part store...

tukangsedot -

Thank you for the demo. It appears to be easy to replace the camera per your instructions. Kind regards. Mehran Gerami

Mehran Gerami -