Einleitung

Tools needed include an iFixit opening tool, a metal spudger, a removable head screwdriver with a T3 bit and a PH0 bit, and needle-nosed tweezers.

  1. xqtqKUpvbFoF1jNf
    • Using a removable head screwdriver and a T4 bit, remove the screws on the base of the phone on either side of the charging port.

    this is not right..

    Filipe Silva -

  2. U43gkCvkTN43TItD
    • Starting near either of the 4 corners of the device notice the seam of the case around the front of the device.

    • Begin using the opening tool with a moderate amount of force to wedge between the back case and the phone.

    • Gently move the tool around the edges towards each corner until the back is removed.

    • You will be able to hear the back casing pulling apart from the phone. Do not be alarmed, but work gently with the device.

  3. LiYtGDjTesUdWP3P
    LiYtGDjTesUdWP3P
    ZFhmcmaQIqCH2VjE
    • Using a removable head screwdriver and a PH0 bit, begin removing the panel beneath the two cameras by unscrewing the screw.

  4. 3jWZii1wcpZ5Jitj
    3jWZii1wcpZ5Jitj
    bMp6lbS5HeGLrtCv
    AWQO3vxDGmSalpmI
    • Use the tweezers to gently pull up on the flaps beneath the two cameras.

    • Completely remove the cameras and replace with the new cameras.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Maegan West

Mitglied seit: 02/10/18

818 Reputation

2 Kommentare

You can read T3 in the summary and T4 in the instructions: which one do I need?

patriziomaugeri -

Does this fix the Zenfone 4 max camera black screen?

Roger Dufault -