Asus Zenfone 4 Max Charging Port Replacement

Geschrieben von: Maegan West
  • Kommentare: 8
Asus Zenfone 4 Max Charging Port Replacement

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

20 Minuten

Einleitung

If your phone fails to charge, it could be due to a malfunctioning charging port. A charging port can be easily damaged by water, corrosion, and debris. This guide will help you replace your damaged charging port

  1. mPhhvpBnMteKlifp
    mPhhvpBnMteKlifp
    j6TihjSI1NuCgVwr

    • Using a removable head screwdriver and a T3 bit, begin by removing the two screws located on either side of the charging port.

    A T3 FEELS too small and a T4 IS too big,the T3 sits in the screw but when I turn it,it strips.

    Sir Frank Macias -

    préciser de retirer le tiroir de la carte sim

    SKRAF Durand -

  2. pKiDjlvuFe31YcYx

    • Gently wedge the opening tool between the phone and the back casing.

    • Move the opening tool up and down to pry the back off of the device.

    Esa parte tiene dos tornillos adicionales

    Fabian Mendoza -

  3. rP56JIqxb2NqaEUo
    rP56JIqxb2NqaEUo
    UfYpedJRHyFgjCTN
    RHB3Y4QAVQYVMLvZ

    • Once the back has been removed, you will need to unscrew the four screws on the bottom panel with an AT3 bit.

  4. wGImJVnClnKleOhO

    • Remove the bottom panel.

  5. gDvCQF4JqAaRdADJ
    gDvCQF4JqAaRdADJ
    IsnOZZHuyULB2Aea

    • Wedge an opening tool between the battery and phone.

    • Gently pry the battery out of the device.

    • You can move the opening on either side of the battery as well as the bottom to aid in removal.

  6. NwYOFEAtwRZG3vJL

    • Remove the battery and replace it with the new battery.

    why do you need to replace the battery with a new one after removing it? Is this step because you wanted new batteries or is it a requirement?

    Merlita Oscares -

  7. G3GmfFbtXCMTPlY5
    G3GmfFbtXCMTPlY5
    IB2fhvCqgZlfSWfl
    AdG4qSkRGvlap4hT

    • Once the battery has been removed, gently wedge the metal spudger beneath the green panel.

    • Lift the panel along with the charging port out the device and replace with the new charging port.

    What do you call the plastic wrapped around the usb port?

    hanspramirez -

    Just completed the guide, three things to note:

    1) You don’t need to remove the battery if you are just changing the charging port board, it just pops out after the screws are out

    2) The rubber around the port just peels off, so if your replacement part didn’t come with it you can just move it over

    3) Remove the SD/SIM card tray before trying to disassemble the phone, or you will bust yours up like I did

    IHOP007 -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Maegan West

Mitglied seit: 02/10/18

818 Reputation

2 Kommentare

repair microfone asus zenfone 4 selfie pro please

John Wesley -

I have managed to replace the charging port but now it shows Charging Port Temperatures Abnormalities Reminder which is loud and annoying to see every time. I also see that one of my sensors in the cpu-z program (thermal sensor pa_therm0) hitting a constant 75-84 degree centigrade and another sensor (chg_temp) hitting 65 constantly. Any help in regards to this manner?

Max Orwell -