Atari 5200 Controller Side Buttons Replacement

Geschrieben von: Alan Abelson
  • Kommentare: 0
Atari 5200 Controller Side Buttons Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

15 - 45 Minuten

Einleitung

  1. rxU2HmVwHwGgFIH3
    rxU2HmVwHwGgFIH3
    rJtVjvW4tq4wDZ6e
    deVUhMuTkeShHV1B

    • Turn the controller over, exposing the three screws on the back. Use a 6mm screwdriver to remove these screws.

    • Carefully slide and pull the two parts of the controller shell apart, exposing the innards.

  2. BREyPXmJlJlJDBa2
    BREyPXmJlJlJDBa2
    lH5gvnllhVOTQdVZ

    • Now that the top of the controller is exposed, the orange, side buttons can easily slide out.

    • Realign the buttons over the sensors/clean the sensor contacts.

    • Be careful when reassembling your buttons. Make sure the black buttons are aligned properly over the silver sensors on the flex board

    • Also, be careful to properly align the bottom of the joystick with the pots (white levers)

  3. J31ghoNDokdyOKLL
    J31ghoNDokdyOKLL
    WyBfCUlKIo6mKFsU

    • Use a spudger to remove the top frame.

    • Take off the plate.

    • Remove the rubber buttons.

  4. RqukCeduWtpKQXNg
    RqukCeduWtpKQXNg
    NGKXFeJGGIG2RXoK

    • Pull the circuit strip through the new space.

    • Realign the top and bottom of the controller.

  5. tnZIqL2IqghcHCL4
    tnZIqL2IqghcHCL4
    Rg6cx3GR65LguAah
    RJoQZkcAAcx2qswi

    • Return the buttons to the top of the controller.

    • Snap the frame back into place.

    • Screw the screws.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Alan Abelson

Mitglied seit: 26/09/14

233 Reputation

0 Kommentare