Audio Technica ATH-M50 Ear pads Replacement

Geschrieben von: HelloMacOS
  • Kommentare: 0
Audio Technica ATH-M50 Ear pads Replacement

Schwierigkeitsgrad

Moderate

Schritte

2

Zeitaufwand

2 Minuten

Einleitung

This Guide will show you how to replace your Audio Technica ATH-M50‘s ear pads

  1. SfWmcF1qA2qC1YbL

    • Unfold the headphones and lay down flat with the pads facing up

    • Once facing up ,tuck your fingers under the edge of the inside of the ear pad and carefully pull up until the ear pad starts to come off

  2. X2R5Vop1GaHLuiNZ

    • After creating a gap continue to lift the ear pad off until fully removed

    • For reinstalling the ear pads use the same techniques for a easy installation

    • On older headphones the foam sponge part of the ear pad can deteriorate,it is recommended that if there is any leftover foam that it is remove to the best of your ability to improve the longevity of the headphone,the drivers are delicate please be careful:-)

    • Congratulations you have now removed your M50’s ear pads:-)

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

HelloMacOS

Mitglied seit: 24/01/22

23766 Reputation

0 Kommentare