Aukey KM-G9 87 key mechanical keyboard Disassembly

Geschrieben von: Drei Eck
  • Kommentare: 0
Aukey KM-G9 87 key mechanical keyboard Disassembly

Schwierigkeitsgrad

Easy

Schritte

5

Zeitaufwand

5 - 10 Minuten

Einleitung

This is a 87 key mechanical keyboard with clicky Cherry-MX compatible switches.

The switches are soldered directly to the PCB.

  1. Cesqu4K3g3EnXTYB
    Cesqu4K3g3EnXTYB
    fhLgsP2gPTNH5p5K
    FOpDRpQ33uFMdkrg

    • The keyboard as it appears before doing any disassembly.

  2. LlrX2oxBitZTZA2Y

    • Remove the keycaps by gently pulling them straight upwards.

  3. jZDAHRVv1sklRSYU

    • There are 12 screws located between the keys (marked with orange circles on the photograph). Remove them with a Phillips PH1 screwdriver.

  4. XhUgSmcyxW1F1ekl
    XhUgSmcyxW1F1ekl
    ZrfmVfWmVjy1XEBx
    YFpUcAolnR2YfsSe

    • Now the backplate can easily be removed.

    • The backside of the PCB and the controller board can be seen. The USB-cable is attached via a connector, use a flat screwdriver to carefully push it out (don't pull on the cable since that might break it).

    • The PCB is hard to remove (don't know if it is possible at all without destruction), since it is hold by the switches which are soldered to the PCB, and on the other side the switches are hold by the frontplate.

    • To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Drei Eck

Mitglied seit: 15/10/22

156 Reputation

0 Kommentare