Axess SPBT1031 Black Faceplate Replacement

Geschrieben von: Michael Bradley
  • Kommentare: 0
Axess SPBT1031 Black Faceplate Replacement

Schwierigkeitsgrad

Moderate

Schritte

2

Zeitaufwand

Keine Schätzung

Einleitung

  1. ComPfBOkFtk1WSPO

    • Look at the side of the speaker that has the red interface plate. Using a Phillips head PH1 screwdriver head, remove screws on the top and bottom of the black face plate. There will be one screw on top and one on the bottom.

    • Both screws are 0.55 cm in depth

  2. dsqJQ3BtRL5LOEHm

    • Separate the black face plate from the tube by pulling them apart.

    • Be careful when pulling the wires apart or it will potentially damage the wires due to over stretching.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Michael Bradley

Mitglied seit: 07/03/16

507 Reputation

0 Kommentare