Axess SPBT1031 Red Interface Plate Replacement

Geschrieben von: Michael Bradley
  • Kommentare: 0
Axess SPBT1031 Red Interface Plate Replacement

Schwierigkeitsgrad

Moderate

Schritte

4

Zeitaufwand

Keine Schätzung

Einleitung

  1. m6CeRR53DyrGdY2q

    • Use a metal spudger to remove the mesh speaker covers (the side with the buttons) by wedging the narrow end into the center of the outer edge of the mesh, touching the red plate.

  2. Wx2TIZUIHHN116At

    • Remove the four 5 mm screws from the red panel under the mesh using a Phillips #1 screwdriver.

  3. LF2wq1qWBmVJ2o2u

    • If the screws are difficult to remove, use a pair of tweezers to twist and pick them out.

  4. XUCPA5q16sNbVPkU

    • Separate the red interface plate from the black face plate by pulling them apart.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Michael Bradley

Mitglied seit: 07/03/16

507 Reputation

0 Kommentare