Einleitung

This guide will go through the process of replacing the ear speaker on the front of this device.

  1. 3uEAi1LYuLaIFieA
    3uEAi1LYuLaIFieA
    YjJCEQsQPPe5taI2
    hMCJlGDmTbPRWhMP
    • Start by locating the slot on the lower right corner of the device.

    • Insert the opening tool into the slot.

    • Pry the back cover off. Once the corner is off, continue around the perimeter of the phone pulling the back off with your fingers.

    • A fingernail can work to open the back in place of an opening tool.

  2. wBXyD5cis6XWToKS
    wBXyD5cis6XWToKS
    51YfKIWsRBCURBdW
    • Locate the indentation at the bottom of the battery.

    • Insert your thumb and pull the battery out.

  3. SnkCKKAKYW4GD2SN
    SnkCKKAKYW4GD2SN
    CS4ZO2DO6xueuSvM
    • Use the 000 Phillips screwdriver to remove the four 4.5 mm screws from the corners of the interior back panel.

    • Use the opening tool to pry open the plastic back panel to expose the motherboard.

  4. ydnBPGBOcMLAiVFs
    ydnBPGBOcMLAiVFs
    WYaXudxF6QKYOfYu
    • Remove volume and lock buttons by lifting them gently from the casing.

  5. wUC5J3TvUHFKHZpk
    wUC5J3TvUHFKHZpk
    jGwB1tP3TSPCTjNO
    • Use tweezers to lift the screen wire tab where the cable is connected.

    • Use the opening tool to pry the motherboard from the front face plate.

  6. glo2TRApq2uWmODW
    • Use opening tool to pry speaker from front panel.

    • Note prong direction

Abschluss

To reassemble your device, follow these instructions in reverse order.

Aaron Boehm

Mitglied seit: 01/03/17

201 Reputation

0 Kommentare