Baby Taylor Guitar String Replacement

Geschrieben von: Mohamed Saleh
  • Kommentare: 0
Baby Taylor Guitar String Replacement

Schwierigkeitsgrad

Moderate

Schritte

9

Zeitaufwand

30 Minuten

Einleitung

Follow my 9-step fast fix procedure to replace your Baby Taylor Guitar’s strings. Guitar strings become dull-sounding and lose their tone as they age, that’s why it’s important to know how to change your guitar strings at any time. When a string is broken or doesn’t sound as sharp as it used to, this guide will help you fix than in less than 30 minutes.

  1. 6SfHMVlctPjFclLW
    6SfHMVlctPjFclLW
    VsTAKLXBM5ZZlJcf
    fLlJPB1msMXR6HYk

    • Rotate the tuner of the string you want to replace in a clockwise direction until it's loose.

    • You can either do it by hand (First Picture) or you can use the guitar string winder (Second picture).

  2. anL44IZXA3kidjAc
    anL44IZXA3kidjAc
    xrB3PL2lKDVKKSnA

    • Grab a plier and pull out the bridge pin of the string you want to replace.

    • Make sure that you've completed step 1 first. The string has to be loose before doing this step.

  3. BgABWpuF5oCmmPin
    BgABWpuF5oCmmPin
    vv5A3Fe42e21VaGO
    G1FToxIcCIQHMK3u

    • Take out the string from the bridge and the tuning pin.

    • You can now throw away the string. You will not be needing it anymore.

  4. dDVWCISgD4mwsgs4
    dDVWCISgD4mwsgs4
    CBrpqQDef3AUGCSh

    • Grab the new string and place the end (ball-end) inside the bridge.

    • The ball-end of a string is the side of the string that has a ball shape. (Shown in picture 2)

  5. O32HQXjAF5JZOMft
    O32HQXjAF5JZOMft
    JGgGskFJQvWEXF3x

    • Place the bridge pin inside the bridge in order to lock in the new string.

    • Lightly hammer down the bridge pin to keep it from detaching.

  6. QwHldfecnmQPRphi
    QwHldfecnmQPRphi
    TW5YaS13OGVnvIMC

    • Cut the excess string with a plier.

    • Cut the string around 1.5 inches over the desired tuning pin. (Recommended by Taylor Guitars)

  7. qHk1L1hnyavWMKA1

    • Place the new string inside the tuning pinhole.

    • It is recommended to place a really small portion of the string inside the pinhole to keep it from ripping your guitar bag. (As shown in the picture)

  8. CcYLTTXc1kaVDW3C
    CcYLTTXc1kaVDW3C
    MoinINnwB3BFJRmW
    sjRgb4cgnx6gSSCA

    • Rotate the tuners in a counter-clockwise direction to tighten the new string.

    • You can either tighten it by hand (First Picture) or you can use the guitar string winder (Second Picture).

  9. U6ZLCg4IyNxMZV6A

    • Make sure your string is in tune and strum away!

Abschluss

Most guitar strings de-tune after they’ve been recently replaced. Tune your strings every once in a while for a few days and the strings will stay in tune.

Tinte & Feder

Mohamed Saleh

Mitglied seit: 19/09/21

230 Reputation

0 Kommentare