Battery Disconnect

Geschrieben von: Thomas Boland
  • Kommentare: 4
Battery Disconnect

Schwierigkeitsgrad

Moderate

Schritte

14

Zeitaufwand

15 - 30 Minuten

Einleitung

Prereq for disconnecting the battery of your Samsung Galaxy A10e.

  1. ZV5rvsFQIWR3YRRC
    ZV5rvsFQIWR3YRRC
    BivE1WKvFHHshfjG

    • Insert a SIM card eject tool, bit, or a straightened paperclip into the small hole in the SIM card tray.

    • Press to eject the tray.

  2. r3HEYQFA2ZdgR22o
    r3HEYQFA2ZdgR22o
    rTE23V51PZSXulFn

    • Remove the SIM card tray from the phone.

    • The SIM card(s) and SD card will fall out of the tray easily.

    • When reinserting the tray, ensure the SIM card and SD card are in the correct slots and oriented correctly.

    • For dual-SIM versions of this phone, there may be two SIM cards. Ensure the SIM cards are placed in the slots corresponding to the correct phone lines.

  3. ZhNlY1GUbXqUm6PN

    • The back cover is held in place by plastic clips.

    • Insert an opening pick between the screen and the back cover on the bottom of the phone where the charging port is located.

  4. JbnQNp1PHKnxDcG3

    • Slide the opening pick to the bottom left corner to release the clips.

  5. AdhXxV44uUAKUSNJ

    • Slide the opening pick along the left edge to the top left corner of the phone, to release the clips.

  6. WFkTvQpkTCXRRbp6

    • Slide the opening pick from the top left corner to the top right corner to release the plastic clips.

  7. LxOvKIscHyoCDQtG

    • Slide the opening pick from the top right corner to the bottom right corner to release the remaining clips.

  8. OpH6L1koMmwR1wnZ

    • Remove the back cover.

  9. TtUFIfPGB6MQBGxQ

    • Remove screws from the motherboard antenna cover.

    • 3 Phillips #00, 3mm length.

  10. KUNd2ME1FyCX1G2i

    • Use the tip of a spudger or tweezers to remove the antenna cover.

  11. owJFTDVlxoFxB11B

    • Remove screws from the motherboard cover.

    • 3 Phillips #00, 3mm length

    There’s actually a 4th screw on the top middle of this cover. Took me and my wife several minutes to figure that one out.

    Justin Wahlquist -

  12. eflhlOeEAyPEIVjZ

    • Use the tip of a spudger or tweezers to remove the motherboard cover.

  13. ZSRqjGKkFCbKJo1p
    ZSRqjGKkFCbKJo1p
    uXSNEVBCUyfXJfPA

    • Use a spudger to disconnect the battery by prying the connector straight up from its socket.

  14. faDPrgwRbluutpeK

    • Gently flex the battery connector away from its socket.

    Nice —- simple…Thanks

    WillitSo -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Thomas Boland

Mitglied seit: 30/09/20

1467 Reputation

2 Kommentare

Do I need to heat up the screen of my phone to make it easier for me to get the back cover off of my phone?

Pifase -

no, it just clips on, there's no adhesive

Ely Wickander -