Einleitung
This is a prerequisite-only guide! This guide is part of another procedure and isn't meant to be used alone.
-
-
Angle the pick down at about 30˚.
-
Slide the pick along the front edge to release the clips securing the lower case.
-
-
-
Insert an opening tool between the lower case and the chassis just to the right of the USB port on the left edge. The end of the opening tool should be pointed upwards.
-
Push the opening tool into the ThinkPad while pushing the end of the tool down to release the clip that is next to the USB port.
-
-
-
Insert an opening pick on the left edge above the USB port. Slide the pick all the way up to the ethernet port to release the clips.
-
-
-
Insert an opening pick on the right edge near the corner.
-
Slide the pick along the right edge all the way to the HDMI port to release the rest of the clips.
-
-
-
Grip the pull tab on the battery connector with your fingers and gently pull away from the socket to disconnect it.
-
To reassemble your device, follow these instructions in reverse order.
