Einleitung
This is a prerequisite-only guide! This guide is part of another procedure and is not meant to be used alone.
Use this guide to disconnect the battery in the Xiaomi Redmi Note 9T.
-
-
Insert a SIM card eject tool into the small hole in the SIM card tray, located on the upper left edge edge of the phone.
-
Press firmly to eject the tray.
-
-
-
Insert an opening pick in a steep angle between the display assembly and the back cover where the charging port is located. This might require some force.
-
-
-
Slide the opening pick to the bottom right corner to release the plastic clips holding the back cover in place.
-
Leave the opening pick in the bottom right corner to prevent the clips from snapping back into place.
-
-
-
Insert a second opening pick in a steep angle at the bottom edge of your phone.
-
Slide the opening pick to the bottom left corner to release the plastic clips.
-
Leave the opening pick in the bottom left corner to prevent the clips from snapping back into place.
-
-
-
Slide the bottom left opening pick along the left edge of your phone to release the plastic clips.
-
Leave the opening pick in the top left corner to prevent the clips from snapping back into place.
-
-
-
Slide the bottom right opening pick along the right edge of your phone to release the plastic clips.
-
Leave the opening pick in the top right corner to prevent the clips from snapping back into place.
-
-
-
Slide the left opening pick around the top left corner to release the top edge plastic clips.
-
-
-
Slide the right opening pick around the top right corner to release the remaining plastic clips.
-
-
-
Carefully fold the back cover to the left side of the phone assembly like you would open the cover of a book.
-
-
-
Use a Phillips screwdriver to remove the ten 3.9 mm-long screws securing the motherboard cover.
-
-
-
Insert an opening pick underneath the bottom right edge of the motherboard cover.
-
Slide the opening pick along the right edge of the motherboard cover to release its plastic clips.
-
Twist the opening pick sideways to pry up the motherboard cover.
-
-
-
Use a spudger to disconnect the home and volume button cable by prying the connector straight up from its socket.
-
-
-
Use a spudger to disconnect the battery cable by prying the connector straight up from its socket.
-
To reassemble your device, follow these instructions in reverse order.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Xiaomi Redmi Note 9T answers community for help.
