Einleitung

Diese Anleitung zeigt dir, wie du den Akku austauschen kannst.

  1. SpcIIAwesDHQiPYC
    SpcIIAwesDHQiPYC
    GwtsDfrkhJf6jHPt
    OCLVEtLSKNcaYyT2
    • Setze einen Spudger unter die Lautsprecherabdeckungen, erzeuge einen kleinen Spalt und entferne sie dann

    • Entferne an der Unterseite den Gummifuß mit dem Beats Pill Logo.

    • Unter dem Gummifuß befinden sich vier Kreuzschlitzschrauben #0. Drehe sie heraus.

    I bought a brand new Beats Pill 1.0 online last week the first night it seemed to work all right the next day I charged it I plugged it in and it was crackling on the left hand side from the front and now the whole volume of both sides very low but it is still getting a Bluetooth connectivity I tried to reset it by holding the baby and the power button to get this thing in the back to flag it would not reset that way any suggestions I meant it is for a lot of money I paid $170 I thought I was getting a brand new device

    Steven Sudnick -

  2. ibjsueMESEAfO6xK
    ibjsueMESEAfO6xK
    qlM6aoC3XPHPPCf2
    sHgIJDc2NDYmoiOT
    • Drehe zwei Kreuzschlitzschrauben #0 heraus.

    • Entferne langsam die zentrale bandförmige Abdeckung und die beiden Ringclips aus der Klebeverbindung.

  3. DqWWYpTAYRJnVPGu
    DqWWYpTAYRJnVPGu
    RYLymKfEaPpGa4wV
    NbPirxro3uMDCGKB
    • Benutze einen Spudger und beginne in der Mitte mit dem Trennen der Gehäusenaht.

    • Zerlege das Gerät in zwei Gehäuseteile. Es sollte dann wie in Bild 3 aussehen.

  4. hLNPMIRCSieNst1q
    hLNPMIRCSieNst1q
    U6V1sKvHv1AUeub3
    • Ziehe den Stecker mit den Lautsprecheranschlüssen (gelb, rot, schwarz, weiß) von der Hauptplatine ab.

    • Benutze ein Erdungsarmband, wenn du die Hauptplatine anfasst.

  5. XLHRmUORku1RAryK
    XLHRmUORku1RAryK
    2qfCFuZxXxgGNwJ6
    • Entferne behutsam das Kabel des NFC-Sensors (rot und schwarz).

  6. yPhEsNHyDWBSJdgP
    yPhEsNHyDWBSJdgP
    Tx2YhNUBunOZpFYX
    • Löse den Stecker, der zur Steuereinheit führt. Er hat fünf Kabel, vier schwarze und ein rotes.

  7. Te4SWjpYdpbJI4Go
    • Der Akku wird von Bändern festgehalten. Entferne vier Kreuzschlitzschrauben #0, welche diese Bänder befestigen.

  8. EssGQ1PMdOv5pwMo
    • Entferne die drei Kreuzschlitzschrauben #0 und die Gummiunterlagen, welche die Hauptplatine befestigen.

  9. 3iLTUvmSaqd2IRvL
    • Hebe die Hauptplatine vorsichtig aus dem Gehäuse.

    • Entferne auch das gelbe NFC Modul mit einer Pinzette.

    Is this two batteries we need to replace? Or is just the right one the battery?

    delliskd -

    The batteries I bought from Amazon came with two batteries alreaded connected to one another. One one set of leads needs to be soldered

    Scott Carpenter -

    Where is the yellow NFC module in the photo? I do not think there is a picture of it removed.

    salcampana -

    You see a part of it on Photoshop step 7, on the top, it’s stuck behind the motherboard screws, just lift it loose with a tweezer or something, it could be a little bit ‘glued’/fixed to its surroundings. After battery change, just put it back, does not need any fixation.

    lofors -

  10. fJXU1P1IgrobWlrZ
    • Entferne die Einschalttaste und die Federn.

  11. hn6kOqdJgyOpWpaT
    • Zwicke das rote und schwarze Kabel an der Hauptplatine mit einem Seitenschneider ab.

  12. MUxcRNBBShO2Eh3a
    • Löte den neuen Akku wieder an die Hauptplatine an, das rote Kabel an Plus, das schwarze an Minus. Wenn du das noch nie gemacht hast, hilft dir unsere Lötanleitung dabei.

Abschluss

Um dein Gerät wieder zusammenzusetzen, folge den Schritten in umgekehrter Reihenfolge.

Paul Haas

Mitglied seit: 13/01/15

766 Reputation

10 Kommentare

donde puedo comprar la batttery para pill beats

felix -

Where can you buy the replacement battery

wtmcclure -

I got a replacement battery for 2.0 from Amazon, it works great! here is the link:

https://www.amazon.com/dp/B072PHZ235

And it also has battery for pill 1.0, pill XL...

Jailene -

Could you please tell what is the yellow card in the last picture?

jmestascatcoparco -

Looks like the Bluetooth antenna

James Jenkins -

It is the NFC module

bobapunk -

Are there two batteries in this thing, or is the left black box a different part?

delliskd -

hello, my dear friend, we have remplacement battery for Beat Pill 2.0. are you interested in introducing it? feel free to contact me.

kevin zhang -

I bought a cheap speaker for no where near the price of what the pill cost me. The battery never runs out! I have had it for years! The pill on the other hand I have changed one already and does not even turn on! Beats should be ashamed for charging what they do for such a poor product with a expensive price tag! And now I’m expected to open it up myself and change the battery! I feel completely mugged off by BEATS. You know that saying about the more expensive the better the product? It’s a 100% lies! Don’t be fooled by a label! Most of the things you purchase are made in China or India and sent to another country where they are stamped and claim it’s made in that county. Wake up people !

Alex -

Oh man 🙈 kann ich die auch einfach zu euch einsenden? 😂

Irina W -