Beats Solo 3 Charging Port Replacement

Geschrieben von: Abdulaziz Alotaibi
  • Kommentare: 0
Beats Solo 3 Charging Port Replacement

Schwierigkeitsgrad

Difficult

Schritte

4

Zeitaufwand

10 - 20 Minuten

Einleitung

This is a charging port replacement guide for the Beats Solo 3 Headphones, Model number A1796. Symptoms that suggest the need for a charging port replacement can be found on our troubleshooting page.

  1. EfcFmCPZTlwWh4w4

    • Use a nylon or metal spudger to carefully remove the ear pad from the right ear cup.

    • Be careful to not rip the ear pad fabric with your tools.

  2. Qd2wP66uQOslLaAe

    • Use a Phillips #00 screwdriver to remove the seven screws that hold the speaker in place.

    • There are two screws in the big red circle at the bottom.

  3. Icyie6TXOwRBVEOT

    • Desolder all wires connecting the circuit panel to the rest of the device.

    • There are two wires in the big red circle at the bottom and one in the small red circle above.

  4. 1iYDg4qWpnHbVlOn
    1iYDg4qWpnHbVlOn
    hR24Jp1DhJ4pXMQv

    • After you desolder all wires you are able to remove and replace the charging port.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Abdulaziz Alotaibi

Mitglied seit: 21/03/22

109 Reputation

0 Kommentare