Einleitung
This is a basic step-by-step guide on how to replace handlebar tape on a bicycle. Whether the bar tape on your bike is ripped, worn-out, or just plain missing, this guide will allow you to replace the tape all by yourself!
-
-
Undo the brake cables holding the brake calipers under tension.
-
Depress the brake/shift levers (brifters) and insert a 5mm Allen key into the internal bolt. This bolt secures the brifters to the handlebar.
-
With the 5mm Allen key, loosen and temporarily remove brifters.
-
-
-
Remove the old tape and discard.
-
Pour some rubbing alcohol on the rag and clean any old adhesive residue off the handlebar.
-
-
-
Starting on the right side of the handlebar, wrap the new tape around the end in a clockwise direction moving inward.
-
Using the scissors, cut the tape at an angle towards the outside of the bar.
-
Wrap the loose end with either electrical tape or the adhesive piece provided with the handlebar tape (pictured here)
-
-
-
On the left side of the handlebar, wrap the tape around the end in a counter-clockwise direction moving inward.
-
Using the scissors, cut the tape at an angle towards the outside of the bar.
-
Wrap the loose end with either electrical tape or the adhesive piece provided with the handlebar tape (pictured).
-
