Black and Decker BDEDMT Motor Replacement

Geschrieben von: Tyler Yurina
  • Kommentare: 3
Black and Decker BDEDMT Motor Replacement

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

15 Minuten

Einleitung

If your device has a faulty motor this is the guide for you. This guide is not very challenging. You may need this guide if your motor has a faulty piece, bad wiring, or failed gears. Replacing the motor can be taken care of in six simple steps.

  1. fqvejJYBKCo2nqHI
    fqvejJYBKCo2nqHI
    KNMQovNO3eyfdKDP

    • Remember to disconnect the device from all external power sources.

    • To detach the matrix attachment piece, press down on the attachment release button located at the top of the device.

    • Leaving your finger pressed down on the button, simply pull on the attachment to release it.

  2. Ul3QPWSdOtaefvow
    Ul3QPWSdOtaefvow
    HVBc4oOIud2okjZJ
    hfD3SJhr6keRJFM4

    • Using a JIS 1 screwdriver, unscrew seven 19mm outer screws located on the armature.

    • Using the same screwdriver, unscrew the 12mm outer screw located on the armature.

  3. fpIisYHT3MOCgYpu

    • Gently pull up the motor and other components at the top of the device except the handle.

    • Watch out for the wires. They are connected to two compressed magnets in the black framework.

  4. SGGJaaEkXMUhYGkp
    SGGJaaEkXMUhYGkp
    KkmmOtNuRKtSLOGJ

    • Slide off the the black framework on the barring side.

    • You may have to compress the magnets in order to slide the framework off of the barring.

  5. dn5PNPLinBb34xMZ
    dn5PNPLinBb34xMZ
    SUEWWBnNdDvwUCah

    • Remove the release button attached at the front of the motor.

    • It may have already come off during Step 3.

  6. PAHkAcDGZydwTrIq
    PAHkAcDGZydwTrIq
    iIufPlJQksUAPpKG

    • Work the silver magnetic ring off of the motor through the barring end.

    • The motor is now free.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Tyler Yurina

Mitglied seit: 02/02/16

407 Reputation

3 Kommentare

Hi,

Please can you tell me where to find the motor replacement part for this tool?

Thank you

Renato -

I have this tool and the attachments and I absolutely love it…but I'm pretty sure the gears are stripped…do you know anything about replacing those?

cwilson0713@gmail.com -