Einleitung
Sometimes, the power switch can become jammed or broken. This guide will show how to take the housing apart and replace the power switch within the Black and Decker BDH9600CHV.
One thing to be aware of would be that the screws are deep within the outside of the housing so an extender could be needed to reach the screws
Werkzeuge
-
-
Unscrew and remove all 5 screws using the Phillips 0 screw bit. Each screw is 17.5 mm long.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
Ein Kommentar
My switch with up & down button box like