Black and Decker Dustbuster CHV1510 Outer Shell Removal

Geschrieben von: luke Gauvin
  • Kommentare: 1
Black and Decker Dustbuster CHV1510 Outer Shell Removal

Schwierigkeitsgrad

Easy

Schritte

5

Zeitaufwand

10 Minuten

Einleitung

This guide shows how to disassemble your vacuum enough to remove and replace a faulty power switch. It is a fairly simple process requiring only a long neck Phillips head screwdriver.

  1. YSRIOkBCBPQ6knIS
    YSRIOkBCBPQ6knIS
    oGKNId2NM4A55ccO

    • Remove nozzle by pressing two blue buttons with unlock symbols on the side of the nozzle.

    • Pull the nozzle upward.

    • The other button cannot be seen on the image.

  2. HE2GMMjAicP6kp1K

    • Remove the six exterior 2 mm Phillips #1 screws that secure the two halves of the outer shell.

  3. QcKWdSNWJIT4fVOM
    QcKWdSNWJIT4fVOM
    ifUNtLZG5NHXllVH

    • Separate the two halves of the outer shell by pulling them apart.

  4. hp6MGOsZwFG5BSnY

    • Remove the grey handle by lifting it towards yourself.

    • Be cognizant of the compressed spring in the handle assembly to prevent it from ejecting.

  5. HNl5RJ5HYsikAxOl

    • Remove the switch assembly from inside the grey handle.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

luke Gauvin

Mitglied seit: 20/03/17

125 Reputation

Ein Kommentar

Well, 50mm thin screw driver is also one of tool, normally people don't have it. Hence special mention of philips screw driver might help user.

nestednloop -