Black and Decker JS660 Angle Knob Replacement

Geschrieben von: Andrew Khouri
  • Kommentare: 0
Black and Decker JS660 Angle Knob Replacement

Schwierigkeitsgrad

Moderate

Schritte

4

Zeitaufwand

20 - 25 Minuten

Einleitung

This guide will give users a step by step on how to replace the angle indication knob on the jigsaw. You will need to by the replacement parts from the link given in the details.

  1. poaf5emkBwBqUCpn
    poaf5emkBwBqUCpn
    VWAeK3xYclpFaipA

    • Unscrew the nine screws to open up the jigsaw

  2. X522ZVbqMWsv1bWg

    • Unscrew the base by unscrewing the two shown in the picture.

  3. WPZURTvmkAJEqPEH
    WPZURTvmkAJEqPEH
    K4OOhqssM2ffFDlV

    • The Jigsaw base will now be off. With the new base simply do the reverse order of steps.

    • Assemble the base on a steady surface.

  4. Vp66AsBCOMOBeDAi
    Vp66AsBCOMOBeDAi
    yIZDfYOVm2dou2YM
    o1jHn6kLOYyc3bQs

    • As soon you disassemble the device, you can see the angel knob is not attached to any screws.

    • You can easily pick it up and replace it.

    • replacment

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Andrew Khouri

Mitglied seit: 08/02/16

468 Reputation

0 Kommentare