Einleitung
Werkzeuge
-
-
To take off the nozzle, filter, and catch bowl first start off by pushing in the button identified with a red square and twist that part of the device toward the handle portion of the vacuum and it should click and pop off the chassis.
-
-
-
Once the nozzle, filter and dust bowl have been removed each part can be removed from the nozzle section of the device.
-
-
-
Once you have successfully unscrewed the five screws holding the cover on you should be able to take the cover off.
-
Remove the L-shaped plastic hook.
-
Once the L shaped hook has been removed the motor will easily fall out of place.
-
-
-
Once the motor has been removed from its home the two wires that are giving it power can easily be removed by pulling on them carefully.
-
This will then allow for you to replace the motor.
-
To reassemble your device, follow these instructions in reverse order.
