Black and Decker TO1303SB Top Cover Replacement

Geschrieben von: Barrett Lowe

Kommentare: 1

Black and Decker TO1303SB Top Cover Replacement

Schwierigkeitsgrad

Easy

Schritte

Zeitaufwand

8 Minuten

Einleitung

In order to complete the other repairs, except for the control knobs, you will need to do this prerequisite. This prerequisite lets you have easy access to the inside of the toaster oven. Ultimately, this guide is created to remove the top cover.

Werkzeuge

Schritt 1

Remove the six 9.5mm screws on the back panel using a #2 Phillips screwdriver.

Schritt 2

Remove the two 13mm screws, located between the feet on the bottom of the cover, using a Torx T15 screw driver.

Schritt 3

Using the metal spudger, carefully pry out the rubber base on each foot to access the screws.

Schritt 4

Remove the 11.5 mm screws using a #2 Phillips screwdriver.

Schritt 5

Remove the back cover by gently pulling the sides of the cover apart from the rest of the oven. Then, tilt the cover towards the face and pull back at an upward angle. The cover should slide right off.

Beware: I have a similar but newer model, TO3260XSBD. The cover doesn’t slide off at all. It has metal safety tabs. There’s no easy way to get the cover off without severely bending it to expose each tab, then snipping them off with cutters.

damoncampagna - 09/05/20