BlackBerry World Edition 8830 Front and Back Casing Replacement

Geschrieben von: Martha de Maria y Campos
  • Kommentare: 0
BlackBerry World Edition 8830 Front and Back Casing Replacement

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

10 Minuten

Einleitung

Outline what you are going to teach someone how to do.

  1. 4uYFORL3HiExqIif
    4uYFORL3HiExqIif
    ORpFoyds4ySFfOtw
    NLLOai3hhLAPVbQP

    • Before beginning this installation, make sure phone is powered off .

    • Turn phone over to the backside.

    • Press down on the lower portion of the back cover.

    • Slide the lower portion down to remove the cover and reveal the battery.

  2. uACwOSEG4beWixuI

    • Remove the battery from the phone.

  3. VHlVMhuAhoCCg2iN
    VHlVMhuAhoCCg2iN
    XMP3MYCCQEqMjUXV

    • Once the battery is removed, remove the four 9.2 mm screws with the T4 Torx Screwdriver.

  4. AMXWTHceAF1enpFu
    AMXWTHceAF1enpFu
    NUXME2wwYYBJjIDJ
    pqufRc4qqA4REFSu

    • Remove side panels with the Plastic Opening Tool by sliding it along the edge of the panel until you can pry it off with the tool.

  5. qoDaeXhGFckLlHev
    qoDaeXhGFckLlHev
    roWhyfN2WrlSqoFu

    • Remove the back casing using the Plastic Opening Tool

    • Once the back casing is removed the top two buttons are likely to pop out.

  6. HtobQrjHDwSdLaiP
    HtobQrjHDwSdLaiP
    EtAEMCJh2NUVykro
    FbL3tnDN4timmZHN

    • Locate the two 9.2mm screws on the upper inside casing

    • Remove them using the T4 Torx Screwdriver

    • Slide off the front casing once the screws are removed.

    • Trackball will fall out once the casing is removed.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Martha de Maria y Campos

Mitglied seit: 12/04/12

55 Reputation

0 Kommentare