Einleitung

  1. DP4uliRysJHuGwaK
    DP4uliRysJHuGwaK
    4ON1XVruYKRqAWQe
    T4iSYVPJstHxvYcN
    • Remove the cover by lifting the notch towards the bottom of the phone. Use your fingernail to lift it up.

  2. r551FXqJ4jIkXLAw
    r551FXqJ4jIkXLAw
    iPjwYAN6LCeGOd5E
    NsWJlCgbLsWXG4xu
    • Remove these nine screws with a small phillips screwdriver. They are all the same size.

    • There is a small screw hidden under the warranty sticker. You may either remove or poke through it .

  3. kwHE4coKlZD3aBcK
    kwHE4coKlZD3aBcK
    hYOTcmuTU6edgdhl
    fMgc6A5YkV5CFwwQ
    • Use the pry tool to gently separate the panel from the frame, starting from the bottom left corner and continue along the edge of the phone.

    • *WARNING* by doing this, you will void the manufacturers warranty.

  4. BrouKXdO5FfsuHhU
    BrouKXdO5FfsuHhU
    CQPSa5GjlJIpAePC
    M5CUpWXSWWNZqwxK
    • Continue using the pry tool around the back panel of the phone to separate both pieces.

    • Once you have gone around the entire frame, use both hands to pull it apart.

  5. 1LSUpt5SIJju4vkc
    1LSUpt5SIJju4vkc
    gISEOIHYuSCaUvYs
    bOotl6xXfEKKv1Dv
    • Use the pry tool to disconnect the camera from the device.

    • Gently lift the camera up and use the tweezers to remove it from the phone.

    • Reinstall the camera. Then follow the guide in reverse to put the phone back together.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Julio

Mitglied seit: 25/10/14

695 Reputation

0 Kommentare