Einleitung
You don't always have to go to your carrier to install your SIM card. Installing a SIM card is a relatively easy process. Follow this guide on how to change or install a SIM card for the BLU Studio 6.0 HD.
Werkzeuge
-
-
To begin the removal of your back panel, first locate the lift tab on the bottom-right corner.
-
-
-
Next, gently slide your thumb (or plastic tool if you prefer) down the seem running the length of your Blu Studio until the rear panel is completely removed.
-
Your rear panel should be placed nearby and in a safe location until you are finished with your task.
-
-
-
Look at the sticker on top of the battery housing and note the model, part number and type.
-
Research this information to find out if you have an unlocked version of the phone.
-
-
-
If necessary slide the unneeded SIM card out of it's slot.
-
Take the front end tip of the SIM card (the side with the corner cut) and slide it gently into the SIM card slot.
-
-
-
Turn on your Studio 6.0 and test it to make sure that everything is working.
-
If your phone gives you an error, check your SIM card installation. If everything seems to be correct make sure your SIM card is activated.
-
If everything is working you're good to go.
-
To reassemble your device, follow these instructions in reverse order.
13 Kommentare
Its saying my Sim card is off..how do I turn it on.
I just got this phone and I install the sim card like they say and it still says no sim card