Boosted Board 1st Generation Rear Wheels Replacement

Geschrieben von: Emily Imfeld
  • Kommentare: 0
Boosted Board 1st Generation Rear Wheels Replacement

Schwierigkeitsgrad

Moderate

Schritte

4

Zeitaufwand

20 Minuten

Einleitung

This guide will help teach you how to take off the rear wheels of your Boosted Board.

  1. YOcOByI3HhfklgSo
    YOcOByI3HhfklgSo
    C1pJWj4KaAnSLSBC

    • Loosen the two 16.74 mm motor mount hex nut screws with a 9/64" Allen wrench.

    • Do Not Remove the Screws.

  2. Gv4qYdR6wxkxyE5J

    • Compress the motor mount back towards the wheel.

    • While keeping the motor mount compressed, tighten one of the hex nuts that you loosened in the previous step.

    • The motor mounts are spring tensioned so it is necessary compress them to loosen the belts.

  3. iGsCd2AKmVtcFnis
    iGsCd2AKmVtcFnis
    SEboQcEKcPxsnX1L

    • Remove the axel nut with a 1/2" socket wrench

  4. ehwMhpudoLWDCQcD
    ehwMhpudoLWDCQcD
    TmJn5KHL21SPmajm
    xLMLPILUQSQqxlGN

    • Rotate and pull counterclockwise until the wheel comes off the axle completely.

    • The front washer will come off with the wheel.

    • Remove the back washer from the axle.

    • Replacing the wheel requires the bearings to be switched into the new wheel.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Emily Imfeld

Mitglied seit: 06/10/16

514 Reputation

0 Kommentare