Einleitung
If the front mesh is dirty on your Bose SoundTouch 10, the front panel may need to be removed for cleaning with a fine bristle brush or compressed air.
You may also need to remove the front panel for access to parts inside the speaker that may need to be replaced.
Werkzeuge
-
-
Turn the speaker over so that the rubber strips along the bottom are facing you.
-
Use the iFixit Opening Tool to peel back the rubber strip on the bottom-front edge.
-
-
-
Use a #2 Phillips screwdriver to remove each of the three 20mm screws on the bottom front edge of the speaker.
-
-
-
Slide the front panel with the mesh covering downwards to disconnect it from the SoundTouch 10 body.
-
Lift the panel away to reveal the speaker head.
-
To reassemble your device, follow these instructions in reverse order.
