Einleitung

This simple guide demonstrates how to replace the filter and oven light in a Broan-Nutone NU230BL oven hood.

Long-term use of an oven hood can cause the quality of parts to deteriorate, in turn causing them not to work as effectively. This is very common and only requires you to replace a few of the worn-out parts, namely the oven hood light and filter.

Prior to starting the guide, make sure that the oven under the hood has been turned off for a significant time to ensure a minimal chance of injury. Never handle hot lightbulbs.

This guide requires little to no technical experience with kitchen appliances, and can all be done by hand.

  1. KkiisWQOxn6p2MpA
    • Make sure the fan switch is centered, and the light switch is set to "off" to avoid any injuries.

  2. PleVcZULVoTaPFNk
    • Squeeze both ends of the bulb cover to pop it out of the slots.

  3. 4M5vehYq1f6aB2KY
    4M5vehYq1f6aB2KY
    AFImIwAeNtcDxcMF
    • Make sure the lightbulb is cool before handling to avoid burns.

    • Unscrew and remove the lightbulb by turning it counterclockwise.

  4. gcAQpRWhlqxRiMxv
    gcAQpRWhlqxRiMxv
    g4ppWRBgwJMh5nZf
    hfcUwgjLDD2Y4jyM
    • Twist the latch above the filter clockwise.

    • Slide the filter out by gently pulling it.

  5. xHUbK6NWm2FwfScB
    xHUbK6NWm2FwfScB
    BTaTKYfwLwbWq1Rp
    Nv6S2YGV54qZRC3t
    • Insert the new filter.

    • Rotate the retaining latch counterclockwise to secure the filter.

  6. udbNkFZFifVmEopb
    udbNkFZFifVmEopb
    TwLiBaZJJJHPjZqL
    • Install the new lightbulb and turn it clockwise.

  7. Qh4NSYGLXUpwGJIX
    Qh4NSYGLXUpwGJIX
    5fOVCACOpwrlcelV
    • Reinsert the lightbulb cover by pressing both sides and fitting the cover's tabs into the slots.

Abschluss

Your range hood is good-to-go!

Mahdi M

Mitglied seit: 17/01/22

169 Reputation

0 Kommentare