Bush Pump Head and Handle Replacement

Geschrieben von: Jake Devincenzi
  • Kommentare: 0
Bush Pump Head and Handle Replacement

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

Keine Schätzung

Einleitung

Follow this guide to remove a bush pump's head and handle for repair or replacement. Be sure to use at least two people when following this guide to prevent injury, as the pump head can be heavy.

  1. DQ3vNKpNe5SOhXRP
    DQ3vNKpNe5SOhXRP
    k6DGYQesDCl4Z1gY

    • Test pump performance by pumping 40 strokes.

    • An effective pump should return at least 10 liters.

  2. jNUQMGok1XJJTJ4S
    jNUQMGok1XJJTJ4S
    154DGnb4xBuSIoIb

    • Remove the two pins connecting the handle to the slider.

  3. QTXXVsap52akJUjk
    QTXXVsap52akJUjk
    o4dJdXOOUe1PfYmU

    • Pull the two lever arms away from the slider.

  4. S24ouNjlTwaBeRwC
    S24ouNjlTwaBeRwC
    C3KewUF6of1CCke1

    • Lift the two pins attaching the pump frame to the head and handle up, off of the pump frame.

  5. TFtScAuC2IlAQDXB
    TFtScAuC2IlAQDXB
    LykHRgRGNkHvMotQ
    nnkZVJuYKUlLTwSD

    • Throughout this step, make sure you support the handle and head with at least three hands.

    • Slide the bearing rod out of the head.

    • Inspect the bearing rod and head for any wear or tear.

  6. JkCv6eFfdiQqx2PK

    • Remove the head and handle, and place them on a clean surface to prevent contamination.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jake Devincenzi

Mitglied seit: 18/04/11

116297 Reputation

0 Kommentare