CHI Spin N Curl Rotating Curler Directional Buttons Replacement

Use a metal spudger to pry off the silver, shiny trim.

Remove inner black housing of the CHI Spin N Curl using the metal spudger to pop it out.

Use a 2 mm flathead to remove the two screws.

Use a metal spudger to pry open the seams of the device.

Toward the bottom of the device, grab the swivel power cord.

Gently pull the power cord to detach it from the CHI Spin N Curl

Use a Phillips #00 screwdriver to remove the screws holding the barrel in.

Remove the screws using Phillips #00 screwdriver and take off the components.

Once all screws are removed, take out the barrel accessing the motherboard underneath.

Using metal spudger, lift and remove the motherboard and disconnect the top components.

After the motherboard is removed, use the metal spudger to push and remove the directional buttons, and wipe underneath with a slightly damp alcohol cotton pad.