CHI Spin N Curl Rotating Curler Power Cord Replacement

Geschrieben von: Jacqueline Ramirez
  • Kommentare: 1
CHI Spin N Curl Rotating Curler Power Cord Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

15 - 25 Minuten

Einleitung

If given a faulty power cord with you CHI Spin and Curl, utilize this guide to replace this component. This guide will provide the necessary steps for deconstructing and replacing the received power cord of the CHI Spin N Curl.

  1. QQAcNGQWaHpFd1Lu

    • Use a metal spudger to pry off the silver, shiny trim.

  2. WXZIAikakUXuCYLf

    • Remove inner black housing of the CHI Spin N Curl using the metal spudger to pop it out.

  3. FmsguqA3EhGWYARm
    FmsguqA3EhGWYARm
    Rn4xAQ3Be5YLybSW

    • Use a 2 mm flathead to remove the two screws.

  4. kRANKNE1oydI6yAE
    kRANKNE1oydI6yAE
    vcPRTjNXG1CQKrly

    • Use a metal spudger to pry open the seams of the device.

  5. QQBEivNkOQAGjYnW
    QQBEivNkOQAGjYnW
    pNw2qTyE6K1QwLGP
    1erXxJjucZYjIgyV

    • Toward the bottom of the device, grab the swivel power cord.

    • Gently pull the power cord to detach it from the CHI Spin N Curl

    • Replace the faulty cord when the original cord has been removed.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jacqueline Ramirez

Mitglied seit: 26/10/22

151 Reputation

Ein Kommentar

but where to get new cable?

Kristián Feldsam -