Campbell Hausfeld FP204800 Check Valve Replacement

Geschrieben von: Caleb Davies
  • Kommentare: 1
Campbell Hausfeld FP204800 Check Valve Replacement

Schwierigkeitsgrad

Easy

Schritte

6

Zeitaufwand

20 - 30 Minuten

Einleitung

The check valve replacement is straight forward. You will need to remove the shroud of the compressor. However, not much more disassembly is required for this replacement.

  1. Qy2BNuucldpypTgD
    Qy2BNuucldpypTgD
    BXiBrIMG6C3QDE21
    BsPjSf3WXUOBxYXO

    • Unscrew the four 1cm long shroud screws using a 6mm Allen Wrench.

  2. QMveUWXroKKOqVD1
    QMveUWXroKKOqVD1
    IIOYC1a6vtIpECCL

    • Remove the plastic shroud from the compressor.

    • Do not pull the shroud too far from the compressor. You could damage the on/off switch wiring.

  3. 1NSrXa3DYSZHDiDp

    • Gently pull the wire attached from the pressure switch to the on/off switch.

    • It should come off the pressure switch with ease.

    • Make sure you are pulling the correct wire. The pressure switch could be in a different configuration on your compressor than in the picture.

  4. hLwthEANdYbaBZkC

    • Gently pull the wire connected from the on/off switch to the motor of the compressor.

    • It should be the only wire keeping the shroud from being lifted from the compressor.

  5. kFLgNoI4DGZXDYFH

    • Unscrew the exhaust tube from the check valve using a Smart Wrench.

  6. vdMny4o5l4XHkUWQ

    • Unscrew the check valve by twisting it counter-clockwise using a Smart Wrench.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Caleb Davies

Mitglied seit: 07/10/14

528 Reputation

Ein Kommentar

I never thought that it will be that much easy. I was looking for this kind of guide and thanks to ifixit and author of this guide I have successfully did the check valve replacement. Thanks for sharing this.

http://zahroofvalves.com

Rodney A. Olsen -