Canon EOS 20D Rear Case Replacement

Geschrieben von: Alec M
  • Kommentare: 0
Canon EOS 20D Rear Case Replacement

Schwierigkeitsgrad

Easy

Schritte

5

Zeitaufwand

2 Minuten

Einleitung

  1. IxWoIR41FAMNrQII
    IxWoIR41FAMNrQII
    V6Whh2xQKKPbGi3k

    • Pull up on both sides of the the eyepiece cap. It should come off with little pressure.

  2. Fqw1Kq4jDy1eQ5ck

    • Remove the two screws hidden under the viewfinder eyepiece cap.

  3. 4rajCQmAD1hUBADo
    4rajCQmAD1hUBADo
    1rVUGtwUTVBbSypV
    SpKRIWRi161qDMu4

    • Peel off the rubber grip on the back by grasping one of the corners and pulling it away from the camera body.

    • Once removed, a hidden screw is revealed.

    • Remove both screws from the rear of the camera.

  4. fKUHrFQxIcNuO6rI

    • Remove the two indicated screws from the bottom of the camera.

  5. GAJoJ4Vk22fU3mQT
    GAJoJ4Vk22fU3mQT
    y3sFhvSJulxk4VVT
    xXq5QVGnkbVtHkse

    • When lifting the panel, make sure not to lift it too high, since you'll run the risk of tearing the cable, or damaging the connector on the board.

    • Flip the lock on the flex cable connector up with a spudger.

    • The front panel should pop off, now that the cable has been disconnected.

    • When reassembling the device, make sure to insert the left side of the front panel first, since it has a small lip that needs to fit under the left part of the camera case.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Alec M

Mitglied seit: 09/05/16

1255 Reputation

0 Kommentare