Einleitung
This is fairly straight forward, and something you may do in the normal use of your camera. It is even in the manual.
-
-
Removing the eyepiece is easy. There are two methods, you can do it yourself, or put it in your camera bag a dozen times and at least once, it will fall off.
-
Grip the eyepiece by the sides firmly (index finger and thumb). Wiggle it upwards until it is off.
-
-
-
Open the battery door
-
Rotate the door so the one side of the hinge pops out (see photo #2)
-
Slide other pin out (it pops out the same, but this is easier)
-
To reassemble your device, follow these instructions in reverse order.
Rubber grips will require adhesive. (I havent gotten this far, I assume rubber cement / double stick tape may work)
Ein Kommentar
But how do you REPLACE the rubber eye piece? Mine seems to be NOT glued, but in a tract of sorts.