Canon PowerShot A2300 Front Cover Replacement

Geschrieben von: Ashley Fincher
  • Kommentare: 1
Canon PowerShot A2300 Front Cover Replacement

Schwierigkeitsgrad

Easy

Schritte

5

Zeitaufwand

5 Minuten

Einleitung

This guide will walk the reader through the process of removing the front cover in order to replace it. There are no prerequisite guides that need to completed in order to remove the front cover.

  1. 6w3UPBMWHTijFeP2

    • Open the A/V Out Digital port cover on the function button side to reveal a screw.

  2. Prry6GKFOSKbkYEI
    Prry6GKFOSKbkYEI
    etEdfpInoJaw6fIe
    IotqN6Y4qglkxpJk

    • Remove all 6 screws(2.70 mm), 2 on each side and 2 on the bottom.

    • Screws are small and very easily lost.

  3. sNByfoLMVunJGkDJ
    sNByfoLMVunJGkDJ
    CuHfpxGdcCDRBMwW

    • Open the card/battery latch by sliding the cover away from the camera in the direction indicated by the arrow.

    • Doing this gives a spot to grip on the bottom of the front cover. This will make it easier to handle when removing.

  4. GUIPjFPecngBBjNw

    • Gently lift the bottom of the front cover to roughly a 30 degree angle.

  5. 1plNmSnyGMMURqHZ

    • Pull the top of the front cover away from the camera by gripping the top of the front cover by the corners where the cover is still attached to the body.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Ashley Fincher

Mitglied seit: 23/03/15

459 Reputation

Ein Kommentar

Are the screws really hard to remove, or is it just me?

Alex Hulinsky -